<noframes id="31lnl">

<track id="31lnl"><ruby id="31lnl"></ruby></track>

    <noframes id="31lnl">

      <pre id="31lnl"><ruby id="31lnl"><b id="31lnl"></b></ruby></pre>
          Chinese Home
          Close

          Laike Hydraulics

          Fluid Solution Provider

          News

          Transition Connector Manufacturer Introduction Battery Lead Connector

          Transition connector manufacturers about battery lead connector, if the battery power is enough, in the broken joint made of clay battery connector mold, with a wire one end connected to the battery good electrode, the other end connected to a carbon rod, carbon dry battery positive pole is, can be obtained by dismantling waste batteries. When the carbon rod touches the damaged electrode, the carbon rod will heat up and melt the lead electrode. In this case, if the amount of lead is insufficient, some broken lead can be added. When the melted lead fills the mold space, the heating will stop. Transition joint manufacturers tell you if the battery power is insufficient, can not effectively on the lead electrode joint heating melting, can find a battery with sufficient power according to the above method, repair the electrode joint. Transition joint manufacturers tell you in the maintenance and inspection often pay attention to the height of the battery fluid, maintain between the upper and lower limits, if too much battery fluid is easy to overflow corrosion body, too little can not fully play the power. If there is white corroding powder, wash and wipe with hot water, and put on a layer of butter to reduce the degree of corrosion. Verify that the battery is strong. Try not to charge the battery after it has been drained, or it will reduce the battery life.


          Related news:


          The transition joint manufacturer teaches the user the difference between fast and loose joint


          Transition connector manufacturers know that the users who ask this question are all named by their surface


          Transition joint manufacturers popular rail frozen joint classification


          Transition joint manufacturers tell you the rail frozen joint classification: the opposite type of rail connection


          What is the expansion joint that transition joint manufacturer introduces


          The transition joint manufacturer tells the user that the expansion joint is also called the expansion joint, it is for compensation


          PREV: Hydraulic Joints Purchased By People Need These Performances In Structure.
          NEXT: NONE
          校花在教室自慰给全班看
          <noframes id="31lnl">

          <track id="31lnl"><ruby id="31lnl"></ruby></track>

            <noframes id="31lnl">

              <pre id="31lnl"><ruby id="31lnl"><b id="31lnl"></b></ruby></pre>